| Customization: | Available |
|---|---|
| Degree of Fineness (Mesh): | 30-500 |
| Size of Feeding (mm): | <40-50mm |
|
Still deciding? Get samples of US$ 13855/Piece
Order Sample
|
| Shipping Cost: | Contact the supplier about freight and estimated delivery time. |
|---|
| Payment Methods: |
|
|---|---|
| Support payments in USD |
| Secure payments: | Every payment you make on Made-in-China.com is protected by the platform. |
|---|
| Refund policy: | Claim a refund if your order doesn't ship, is missing, or arrives with product issues. |
|---|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
The vertical Wood flour machine uses grinding wheels to grind, and uses the ultra-fine powder method of impact, squeeze, and roller grinding to grind the wood to below 300-500 mesh. It is Chinese advanced wood mill processing equipment.
The grinding device adopts overlapping multi-stage sealing, all fine powder can be recovered, and the equipment is clean and environmentally friendly. The periphery of the host adopts a water-cooling cycle to ensure that the machine can run continuously for 24 hours.
The finished product ranges from 60 to 500 meshes, equipped with a professional impeller governor, and the particle size of the finished product can be adjusted without stopping the machine.
working principle
1, crushing blade: 7 type knife, type of dao and centrifugal
2. The machine is composed of fan, powder collector and dust collector
3, the main crushing chamber adopts 7 knife, a knife and centrifugal knife, there are coarse crushing, fine crushing and centrifugal grinding, driven by the motor crusher rotor operation, so that the mechanical air to crush the material to produce compression force, cutting force, friction, to crush the function.
4,In the process of cutting and crushing of three kinds of blades, the rotor generation airflow rotates with the direction of the blade, the material accelerates in the airflow and repeatedly impacts, cutting friction, and is subjected to three kinds of crushing at the same time. The crushed material enters the analyser for analysis with the airflow, because it is affected by the centrifugal force of the analyser rotor and the centripetal force of the airflow. The fine particles enter the powder collector with the air flow, and the coarse particles enter the centrifugal grinding chamber to continue to crush until you are satisfied with the fineness
A wood powder milling machine is applied to break the following material: Bamboo powder, nuts, herbs, bark, leaves, wheat bran, rice husk, corn cob, straw, starch, food categories, dried small shrimps, fish meal, shellfish, seaweed, dehydrated vegetables, Hawthorn, ginger, garlic slice, pumpkin powder, spices, jujube, paper, circuit boards, plastics, chemical raw materials, water products, spices, fodder, mica, graphite, Lees, furfural, bread, charcoal, activated carbon, cellulose, potato Java, tea, hair, soybean, cotton, refined cotton, cowhide, sheepskin, plant root, stem, leaves, flowers, fruits, various edible fungi, hundreds of difficult characteristic materials process.
Hammers are heat-treated and surface hardened. Surface carburizing and tungsten carbide can increase the wear resistance of the hammer
and prolong its service life.
Product Real Shot
| Model | FM-MF500 | FM-MF800 | FM-MF1000 |
| Power (kW) | 11-18.5 | 22-30 | 45-55 |
| Speed (r/min) | 3600 | 3300 | 2900 |
| Quantity of blades (pieces) | 36 | 72 | 96 |
| Degree of fineness (mesh) | 10-500 | 10-500 | 10-500 |
| Size of feeding (mm) | <30-35 | <30-40 | <40-50 |
| The moisture content of materials | <6% | <6% | <6% |
| Weight (kg) | 1600 | 2600 | 3800 |
| Floor space (meter) | 4.6×1.8×3.5 | 7×2.5×4.3 | 7×2.8×4.3 |
Wood powder making machine Feature:
1. Compared with other roller mills, the output is increased by 20~30% under the same power condition, and the grinding pressure of the grinding wheel on the material is increased by 60~80% under the action of high pressure centrifugal force. The output is 150~ higher than that of hammer mill 300%.
2. Energy saving: The energy consumption of the crushed chips is only about 1/3 of that of the jet mill under the condition of the same output and fineness index;
3. Good product fineness index: In the crushing of wood chips, the fiber degree is good, and the finest can be 200-350 mesh.
4. The product fineness can be adjusted without stopping the machine, and all the fine powder can be recovered without polluting the environment, equipped with a stepless speed regulator with a classifying impeller. .
5. The machine has a cooling function, and the temperature is low during crushing. It's especially suitable for processing heat-sensitive and fibrous materials. The product size is uniform.
6. It fully meets the national dust emission standards in terms of dust removal effect.
7. The grinder adopts overlapping multi-stage seal with good sealing performance.
8. The wear parts of the crushing part are made of wear-resistant alloy materials. They have a long service life.
9. Stable mechanical performance, can work for 24 hours without interruption.
Our Service:
Pre-sale services
1.Provide the free consultation of the machine.
2.Provide the standard device and the flow chart
3.According to the clients' special requirement, offering the reasonable plan and free design helping to select the machine
4.Welcome to visit our factory or the domestic clients' factory.
Services during the sales
1.Help client design the factory and offering professional advice, free engineering drawing for the factory layout.
2.Inspect the machine before leaving the factory.
3.Send our experienced workers and engineer to your factory for installing and adjusting all the machine
4.Train the first-line operator.
5.Provide the basic formula.
After sale services
1.One year warranty
2.24 hours online service
3.Provide technical exchanging
We have a long-term working shipping forwarder. We can do our best to send the machine to your port safe and sound.
If your need it, we can help you do custom clearance.
Packaging Details:
Big-size equipment will be fixed by steel wire, while small ones together with spare parts will be packed into wooden boxes.
1. Outside package: Standard export wooden cases.
2. Inner package: Stretch film.
Shipping
Usually by sea, sometimes by land, air.
Delivery time: 10-20 days after the deposit arrived.
Q1:How about the quality of your product?
-- Our products manufactured strictly according to national and international standard.
-- We have CE ,ISO certification
-- We take a test on every product before delivery.
Q2:How about price of this product?
-- We can give the lowest price than market one.
-- We do quotation as soon as possible for any customer.
-- Discount can be given according to quantity.
Q3:What is the MOQ?
-- 1 set.
Q4:If you can be custom-made?
-- We can make products according to customer's requiments.
Q5:What is the voltage?
-- we can change it according to customer's requirement.
){kind=link}